• Images - scroll through images here. Enter fullscreen at bottom right
  • Request Details - send us a message directly to ask about this listing
  • Make Offer - make an offer on this listing and we will communicate to the seller
  • Email listing - send this listing to yourself or a friend by email
  • Print Boat - print this listing for future reference
  • Boat Summary - full details on this listing are available here
  • Help - Click here to bring back this guide

20'6" Feet 2016 Home Built Torpedo Runabout

20'6" Feet 2016 Home Built Torpedo Runabout

$30,000 (USD)

Boat ID: 42228

Request Details
Make Offer
Email Listing
Favourite
Contact us directly - 800-675-4089
Learn how the process works (FAQ)
Boat Summary
$30,000 (USD)
Boat ID: 42228

I started building in 2006 and completed it in 2016. The construction is 1/2" mahogany fastened to white oak frames with silicon bronze screws. All wood members including the bottom are sealed with Smiths cpes and assembled with 3M 5200. I followed Don Danenbergs method. all wiring is neww with a fuse panel installed. There is a small extinguisher up front and a 10 lb one mounted in the engine compartment with a remote cable. It has a bilge blower and bilge pump and all USCG required safety equipment. The shift lever is mounted on the steering column for easier operation. Both the deck and topside planking is book matched and no corners were cut. This was not a kit but a one off along the lines of the early Chris Crafts. The boat runs a dry bilge and the packings are drip free. Despite the torpedo hull maintenance is fairly easy. For example to winterize there are no plugs to pull in order to drain the engine block. I have installed valving at the seacock to allow the engine to be run on the trailer by means of a hose set up drawing water from a large trash can with a plastic bag liner. when its time to winterize I simply move the hose from the water source to a bucket of 3 gallons of environmentaly safe antifreeze. When it starts coming out the exhaust blue - shut the engine off. I have $40,000 invested in this boat, not including labor.

Location:
brunswick, OH
Views:
1,057
Boat Details
Year:
2016
Manufacturer:
Homemade
Model:
torpedo,runabout
Length:
20',6"
Beam:
Engine Details
Year:
2008 new manufacture
Make:
Marine Power 5.7L, 315hp
Cylinders:
8
Hours:
8-10
Max Speed:
Fuel Type:
Trailer Details
Year:
Unknown
Manufacturer:
Shorelander
Axles:
Tandem
Capacity:
Sufficient
Brakes:
Yes
Comments:
Converted from a roll on to a bunk. new surge brakes and wiring harness. The tires are like new.
Other Information
Boat Cover:
Yes
Stereo:
No
Tonneau:
Yes
Spotlight:
No
Side Curtain:
No
Convertible Top:
No
Fume Detector:
No
Fire Extinguisher:
Yes
Comments:
People who viewed this boat also found these interesting